HMC

HMC 30 Gallon Oil Caddy - 3.5:1 Digital Preset (OC-30L-3.5:1-DNP905-20)

This is HMC's top oil caddy model. It combines the fast 3.5:1 pump ratio, a 20 foot hose for long reach, and digital preset dispensing that shuts off automatically once you hit your target amount...

HMC 30 Gallon Storage Tank (STR-30)

This 30 gallon tank is built for fixed-location fluid storage. It's vented and comes with a built-in capacity gauge, so you always know how much is left without opening the tank up. HMC can customize...

HMC 30"x70" Welding Table (SWT-3070-P)

This HMC welding table gives you a full 30 inch by 70 inch steel top that raises and lowers to match the job in front of you. The table has 7 height settings, from about 23 inches up to 40 inches,...

HMC 30"x86" Motorcycle Lift (SL-3086)

This lift table gives you a full 30 inch by 86 inch platform and holds up to 1,200 pounds. It's sized for everything from mopeds and scooters to full-size cruisers. The closed height is just 7 1/2...

HMC 30"x90" Motorcycle Lift (SL-3090)

This lift table gives you a 30 inch by 90 inch platform that holds up to 1,200 pounds. It comes with a 32 inch ramp sized for everything from small scooters to full-size cruisers. The table ships...

HMC 30"x90" Motorcycle Lift - Double Cylinder (DCSL-3090)

This lift uses two cylinders instead of one, so it can raise up to 2,100 pounds — almost double what a standard 1,200 pound table can handle. It's built on the same 30 inch by 90 inch platform as the...

HMC Cam Bearing - SL Series (2515-A)

This is a single replacement cam bearing for SL Series lift tables. Order it on its own if only one bearing has worn out and the rest of the set is still good. Technical Specifications Part Type:...

HMC Cam Bearing Kit - SL Series (SLB-2.38 Kit)

This kit gives you a complete set of cam bearings for your SL Series lift table — all 4 bearings and the snap rings that go with them, in one purchase. It's the better deal if you're replacing the...

HMC Caster Set - SL Series (SLC-4)

This caster set lets you roll your SL Series table around the shop instead of dragging it across the floor. It's built for shops that move lifts between bays often, or that need to clear floor space...

HMC Condor Wheel Chock - SL Series (SC-2000)

This Condor wheel chock holds the front wheel upright on your SL Series table without clamping down on the fork. It's a quick way to steady a bike for general service work when you don't need the...

HMC Cycle Vise - SL Series (CV-2049)

This cycle vise clamps the front wheel down tight to your SL Series table. With the wheel locked in place, you get both hands free for tire changes, fork work, and brake service — no second person...

HMC Cylinder Seal Repair Kit - AC-2085 (AC-2085-Repair Kit)

This seal repair kit rebuilds the AC-2085 cylinder, and it also fits HMC's 6 inch cylinders and Handy Vintage 6 inch cylinders. It's a lower-cost fix for when the cylinder body itself is still good...