HMC

HMC Foot Valve, Air Operated - SL Series (FV-250)

This air-operated foot valve controls the height on your SL Series lift table. Replace it when the valve starts sticking, leaking air, or won't hold the table's position reliably anymore. Technical...

HMC Front/Rear Extension Kit - SL-3090 (SL-3090-F/REXK)

This kit extends your lift table's working length at either the front or the back end, instead of adding width the way the side extensions do. It bolts on without changing your table's 1,200 pound...

HMC GP-1 Pump + CH-11 Hose Combo Kit (GP-1/CH-11)

This combo bundles the GP-1 pump with the CH-11 hose, which has a modified 3/8 inch nozzle sized for the smaller GC-20 and GC-15 series caddies rather than the larger GC-30. Technical...

HMC GP-1 Pump + CH-12 Hose Combo Kit (GP-1/CH-12)

This combo bundles HMC's GP-1 bi-directional hand pump with an 8 foot CH-12 fuel hose. It's everything you need to add pumping and dispensing to a gas caddy or storage tank in one purchase, and it...

HMC GP-1 Pump + CH-16 Hose Combo Kit (GP-1/CH-16)

This combo bundles the GP-1 pump with the longer 16 foot CH-16 hose, for setups where the caddy can't sit right next to the tank you're filling. Technical Specifications Includes: GP-1 pump +...

HMC HRP-1 Pump + CH-11 Hose Combo Kit (HRP-1/CH-11)

This combo bundles the imported Hy-Pro pump with the CH-11 hose sized for GC-20 and GC-15 series caddies. It's HMC's lower-cost combo option for smaller-tank setups. Technical Specifications ...

HMC Inside Replacement Frame Assembly - SL Series (2106-PR)

This is a full inside frame assembly for SL Series lift tables. Pair it with the outside frame assembly (2107-PR) when you need to replace the entire frame. Technical Specifications Part Type:...

HMC Lift Top Parts Tray - SL Series (2038)

This parts tray sits on top of your SL Series lift table and keeps small parts, fasteners, and tools within reach while you work, instead of scattered across the table or the floor. Technical...

HMC Outside Replacement Frame Assembly - SL Series (2107-PR)

This is a full outside frame assembly for SL Series lift tables. Order it when the frame itself is damaged beyond repair, rather than just one part of it. Technical Specifications Part Type:...

HMC Phenolic Wheel Kit - SL Series (Phenolic Wheel Kit)

This kit replaces the wheels on your SL Series lift table. It includes two 4 inch phenolic wheels and the snap rings you need to install them. Phenolic wheels won't mark up your shop floor the way...

HMC Quad Side Extension Package - SL-3090 (SL-3090 Quad Side X Package)

This is the full Quad extension kit for your lift table. It comes with four side extensions and a ramp, and each extension comes off on its own — no wrestling one big panel by yourself. It's also how...

HMC Replacement Air Cylinder - SL Series (AC-2085)

This air cylinder is the part that actually raises and lowers your SL Series lift table. When a cylinder wears out or fails, this replacement restores full lift function — you don't have to replace...