Product Description
GIpro ATRE combines two functions in one unit. It's a gear position display, same as the rest of the GIpro line, plus ATRE, which stands for Advanced Timing Retard Eliminator. That second part smooths out the ignition cut your bike applies during a shift (the same timing retard the X-Tre Power Box targets on Kawasaki and Suzuki), so the power comes back in cleaner after each gear change.
Key Features
- Reads your gear the instant you release the clutch, and you can tune the sampling speed to match how fast you shift.
- Fully sealed housing with touch controls on top, no physical opening for water to find its way in. Also works with the optional GIpro Mount if the stock placement doesn't suit your bike.
- Most bikes take under 30 minutes to install with the Plug 'n Go harness.
- Bright LED display available in 5 colors, with brightness that adjusts automatically to ambient light.
- The built-in Advanced Timing Retard Eliminator sharpens throttle response in the lower gears and lifts the speed limiter on bikes over 1000cc, it ships disabled and switches off automatically in neutral. Only use it off public roads.
- Comes pre-tuned for most bikes out of the box, with a manual learning mode if your bike needs it.
- Encapsulated construction, flash memory that holds your settings even with the battery disconnected, and an IP68 waterproof rating.
- Size: 20 x 30 x 13 mm (0.7 x 1.2 x 0.5 inches)
- Weight: 61g
Pick your part number and display color, that's it. Everything ships in one box, no separate harness to track down.
Not sure which part number your bike needs? Use the fitment search bar above, pick your Make, Model, and Year, and it'll find the right one.
FAQ
What's included when I buy this?
The full unit for your bike, no separate harness to order. Your bike-specific fitment is built into the part number you choose here.
Will it still work if my bike has a racing ECU installed?
Yes, it works fine alongside a racing ECU.
Can I check which ATRE mode is currently active?
Yes, it's shown right in the unit's menu.
Will the GIpro and the SpeedoHealer work together?
Yes, both units run independently and won't conflict with each other.
I already have a Power Commander, is there still a reason to get this?
Yes. A Power Commander only adjusts the fuel map, it doesn't touch ignition timing. The ATRE function in this unit removes the timing retard your ECU applies in the lower gears, which a Power Commander can't do.
