Product Description
Long and flat: 48 cm in length, 25 cm in width, 20 cm in height. This 3.2 gallon tank, whose listing names Honda's VLX 400 and 600, Steed 400 and 600, is bare metal and has a gas cap in the parts line.
What You Get
The listing gives 12 litres, the same as 3.2 gallons. Next size down: 2.9 gallons (11 L). Above it: 3.7 gallons (14 L). 0.5 gallons above this tank. A cap appears alongside the tank. One more note from the listing: the rod that seats the tank at the front may need trimming to fit.
Make It Yours
Test fit first, then think about paint. A shop can shorten the rod and check clearances in the same visit. Expect to do the prep yourself. Have the tank pressure tested first. Ask a shop about sealing the inside. Check the mounts along with the fuel line layout and the frame rails on your motorcycle ahead of your purchase. Pay a professional to do the installation. Expect no factory badge here. Fit can call for a slight modification.
Technical Specifications
- Capacity: 3.2 US gal (12 L)
- Finish: Unfinished (bare metal)
- Size: 48 x 25 x 20 cm
- Plate thickness: 1.5 mm
- Includes: 1 x Fuel Tank, 1 x Fuel Tank Cap
- Model years: Not listed
Fitment
- Honda VLX 400 | Model years not listed
- Honda VLX 600 | Model years not listed
- Honda Steed 400 | Model years not listed
- Honda Steed 600 | Model years not listed
The listing gives no model years. Before you order, check the tank mounts, the frame and the fuel line layout on your own bike.
FAQ
Is there a list of years?
No years are named for this tank. Models named: Honda's VLX 400 and 600, Steed 400 and 600. Check the mounts along with the fuel line layout and the frame rails on your motorcycle ahead of your purchase.
Does it name Steed and VLX?
Listed: VLX and Steed. We add no fit claim. Look up your own model first.
Will it need modification?
Pay a professional to do the installation. A quick trial fit saves rework. Per the listing, the front mounting rod may have to be shortened. Not a factory part: aftermarket. Mounts could need small changes.
Is it bare metal?
The finish line says unfinished. Scuff the bare metal, prime, then paint. A shop should leak test it first. Do not leave bare metal raw.
Will I get a cap with it?
Yes, a cap is named. That is the full parts line.
Is a 48 cm length too long for my frame?
We cannot judge that from here. The tank runs 48 cm end to end, 25 across and 20 high, so cut a cardboard outline of that size, lay it on the frame and look at it from the side. Our 41 by 25 by 21 cm tank is shorter, if this one crowds the seat.
What is the return policy?
A return can start within 30 days. Placed orders are final, with no cancelling. Waits run 3 to 7 weeks.